The first of its kind!

Previously, the only way to build a competition-capable rock crawler was to buy bits and pieces of several different kits here and there over time just to get the right parts together to start building. Now, you can get everything in one box, and in a few hours of build-time be able to hit the rocks with the Axial AX10 Scorpion 1/10 Rock Crawler Kit. Axial has designed a completely new kit from the ground up.

Each detail has been well thought out and provides you with a solid base to work with:

• Chassis
  The AX10 Scorpion chassis is lightweight and stiff. Twin 2.0mm aluminum side plates are tied together with aluminum posts and a molded-nylon skid plate/transmission plate. The chassis was made as small and compact as possible to cut weight. A simple battery/radio tray makes installation of your electronics quick and easy. Wheel base is adjustable from 304mm 320mm.
• Transmission
  The AX10 Scorpion transmission was designed to place the weight of the motor as low as possible, while still allowing a wide range of gearing choices. The overall ratio can be adjusted from 15:1 all the way up to 74:1 using different pinion/spur gear choices. The transmission is locked with no differential action, and features hard anodized aluminum out-drive shafts.
• Shocks, Links and Driveshaft
  Super-long shocks offer a wide range of articulation as well as optional springs so you can tune your crawler to work on any terrain. All suspension links are made from light and strong aluminum. The driveshaft is made from super-strong composite material and features hardened metal yokes.
• Axles
  The axles have been designed with many features not available from other choices on the market. Everything from the axle strength, pinion angle, caster, and ground clearance were taken into consideration. The result is a stronger and better axle that will last. An aluminum diff locker is included, with hardened drive shafts and axles.
• Wheels, Tires and Body
  No crawler would be complete without the essentials. The AX10 Scorpion is outfitted with the popular 2.2 Rockster beadlocks sporting green rock rings and Rock Lizard tires. Also included is the popular B-17 Betty body in .040" thick polycarbonate.

FEATURES:

• Complete competition ready kit
• Axles feature an improved driveshaft angle and castor, and leading steering throw
• Aluminum Chassis plates with a molded nylon skid plate
• Ultra compact and lightweight transmission
• Full time locked four wheel drive
• Full Ball bearings
• Overall gear ratio range from 15:1 to 74:1
• Transmission: 2.6:1, center-mounted
• Differentials: Locked style (spool)
• Transmission: Single-speed
• Tires: Axial 2.2 Rock Lizards
• Wheels: Axial 2.2 Rockster Beadlocks
• Suspension: 3-Link
• Drive Shafts: Universal front and rear

Required but not included:
2-Channel Radio with 1 standard servo
540/550 Size electric motor and electronic speed control
7.2v sub-C 6-cell stick battery pack

SPECS:

• Wheelbase: 12-12.6" (304-320mm )
• Width: 10" (254mm )
• Height: 6.125" (156mm)
• Weight: 3.5 lbs (1588g )
• Articulation: 70 degrees
• Ground Clearance: 3.125" (79mm)
• Length: 438mm (17.25")
• Width: 181mm (7.125")
• Height: 133mm (5.25")